HDSP RS485/422
Article number: 56 056- Two-stage surge protection of connected RS485/422 bus device in Full-Duplex configuration.
- They are installed prior to the protected equipment and at the interface of LPZs 1 – 2 and higher.
- They increase the EMC level of the connected equipment against switching and atmospheric transients tested according to IEC 61000-4-2 (ESD level 4), IEC 61000-4-4 (EFT level 4) and IEC 61000-4-5 (shock pulse level X = 6 kV).
- The connection of the module allows to use the operating range of bus drivers according to the TIA/EIA-485-A standard in the range of -7 V to +12 V (common-mode voltage range).
- Connecting the module allows you to use the full 10 Mbps bus speed according to the TIA/EIA-485-A or TIA/EIA-422-B standard.
- High-speed current protection of data line X1-2, X3-4, X5-6, X7-8 200 mA.
- For extended protection of the common reference wire and bus shielding, use the additional mudule 1GDT/70.
pcs
Inquire
Testing category according to IEC 61643-21:2000 and EN 61643-21:2001 | C2, C3, B3 | |
Number of pairs | 2 | |
Connector type | Screw terminals | |
Maximum continuous operating voltage DC of data line X1-9, X3-9, X5-9, X7-9 | UC | - 7 ÷ 12 V |
Rated load current of data line X1-2, X3-4, X5-6, X7-8 | IL | 0.2 A |
Data link current protection at 25 °C | Itrip | 0.2 A |
Max. response time for data link protection | tblock | 1 µs |
C2 Nominal discharge current (8/20) | In | 5 kA |
C2 Voltage protection level X2-10, X4-10, X6-10, X8-10 at +In | Up | 20 V |
C2 Voltage protection level X2-10, X4-10, X6-10, X8-10 at -In | Up | - 12 V |
C2 Voltage protection level X2-4, X6-8 at In | Up | 26 V |
C3 Voltage protection level X2-10, X4-10, X6-10, X8-10 at +1 kV/μs | Up | 17 V |
C3 Voltage protection level X2-10, X4-10, X6-10, X8-10 at -1 kV/μs | Up | - 10 V |
C3 Voltage protection level X2-4, X6-8 at 1 kV/μs | Up | 25 V |
Serial resistance of data line X1-2, X3-4, X5-6, X7-8 | R | 8.6 Ω |
Capacitance X2-4, X6-8 at 0 V | C | 40 pF |
Limiting transmission frequency S21 for Z0 = 120 Ω | fC | 50 MHz |
Lightning protection zone | LPZ1, LPZ2, LPZ3 | |
Housing material | Polyamid PA6, UL94 V-0 | |
Degree of protection | IP20 | |
Operating temperature | ϑ | - 40 ÷ 70 °C |
Clamp fastening range (solid conductor) | 0.2 ÷ 4 mm2 | |
Tightening moment | 0,5 | |
Installation | On DIN rail 35 mm | |
Operating position | Any | |
Remote signalling | No | |
Modular design | No |