HGDT25
Article number: 30 051- Lightning impulse current and surge arresters type T1+T2.
- The products consist of gas discharge tube with high discharge ability.
- Installed at the boundaries of LPZ 0 – LPZ 2, in TN-S, TT power supply systems and in a special design also in IT power supply system.
- Balance the potential between the N and PE conductors in 1+1, 3+1 connection modes.
- Ensures zero leakage current through the PE conductor.
- M indication specifies a type of construction with removable module.
| Test class according to EN 61643-11:2012 (IEC 61643-11:2011) | T1, T2 | |
| System | TN-S, TT | |
| Maximum continuous operating voltage AC | UC | 255 V |
| Impulse discharge current for class I test (10/350) N/PE | Iimp | 25 kA |
| Charge (N/PE) | Q | 12.5 As |
| Specific energy for class I test (N/PE) | W/R | 156 kJ/Ω |
| Nominal discharge current for class II test (8/20) N/PE | In | 30 kA |
| Voltage protection level at Iimp | Up | < 1.4 kV |
| Temporary overvoltage test (TOV) for tT = 0.2 s (N/PE) | UT | 1 200 V |
| Response time (N/PE) | tA | < 100 ns |
| Follow current interrupt rating | Ifi | 0.1 kArms |
| Lightning protection zone | LPZ 0-1, LPZ 1-2, LPZ 2-3 | |
| Housing material | Polyamid PA6, UL94 V-0 | |
| Degree of protection | IP20 | |
| Operating temperature | ϑ | - 40 ÷ 70 °C |
| Minimum cross-section of connected Cu conductors accord. to HD 60364-5-53:2022 (doesn't apply to „V“ connection) for T1 | S |
6 mm² (L, N) 16 mm² (PE, PEN) |
| Minimum cross-section of connected Cu conductors accord. to HD 60364-5-53:2022 (doesn't apply to „V“ connection) for T2 | S |
2.5 mm² (L, N) 6 mm² (PE, PEN) |
| Clamp fastening range (solid conductor) | 1.5 ÷ 25 mm2 | |
| Clamp fastening range (stranded conductor) | 1.5 ÷ 16 mm2 | |
| Tightening moment | 3 | |
| Installation | On DIN rail 35 mm | |
| Modular width | 1 | |
| Operating position | Any | |
| Signalling at the device | None | |
| Remote signalling | No | |
| Lifetime | > 100 000 h | |
| Pluggable version | No |