Article number: 70 959
  • HIG-IFL DELTA is a fault location module that together with the HAKEL HIG95-DELTA Insulation monitoring device forms a fault location system for health IT systems (MIS).
  • HIG-IFL DELTA module is equipped with six sensing sensors that enable the location of the fault on up to 6 MIS pins.
  • HIG-IFL DELTA connects itself to the HAKEL HIG95-DELTA via the IFLS BUS with up to 10 pcs of HIG-IFL DELTA per bus.
  • Thanks to this, it is possible to implement a fault location system on a single isolated health IT system (MIS) on up to 60 outlets of one system.
  • Fault location module HIG-IFL DELTA is powered from an independent low voltage 24 V DC power supply. A suitable source can be HAKEL HIG-PS 24V/5W product range.
  • The module is installed on a 35 mm DIN rail and has a width of 12 TE.
Designed for insulation monitoring device HIG95-DELTA
Monitored IT power supply system type according to IEC 61557-8 AC, MED
Rated voltage of monitored IT system (AC) Un 230 V
Supply voltage range 9 ÷ 36 V
Power consumption P 1.5 VA
Power source External power supply SELF 24 V DC
Number of measuring inputs 6
Total possible number of inputs 60
Max. locating voltage value UL 24 V
Max. locating current value IL < 0.5 mA
Measuring accuracy ± 30 %
Communication interface for user USB
Electrical strength against internal circuits 2 500 V
Housing material Polyamid PA6, UL94 V-0
Degree of protection IP20
Operating temperature ϑ - 15 ÷ 70 °C
Protection class according to IEC 61140 II
Recommended cross-section of connected conductors S 1 mm2
Installation On DIN rail 35 mm
Modular width 12
Recommended back-up fuse 6 A/gG
Operation type Permanent
Operating position Any
Quick contact
Ing. Aneta Sčebelová
 +420 494 942 314