HIG-MT 40/5 A
Article number: 71 532- Primarily used to detect the current load of a Medical IT system, which is monitored by an insulation monitoring device from HAKEL.
- Available in the range of primary current from 25 A to 100 A, with secondary current 5 A.
- Construction is pluggable, supplied in two dimensional versions, depending on the primary current.
- Designed for installation in an isolated power panel, they can be mounted to the distribution board using reduction brackets (included), or using a DIN rail bracket (must be purchased separately).
- Alternatively, the transformer can be mounted directly on the copper profile, up to a maximum size of 20 x 10 mm.
- Works reliably with HAKEL HIG95-DELTA and HIG95+ insulation monitoring devices.
| Primary current | 40 A | |
| Secondary side current | 5 A | |
| Power | P | 1 W |
| Accuracy class | 1 | |
| Overcurrent number (FS) | 10 | |
| Transformer construction | Pluggable (without interrupting the primary conductor) | |
| Frequency | f | 50 ÷ 60 Hz |
| Housing material | Self-extinguishing | |
| Recommended cross-section of connecting wires | S | 1.5 ÷ 2.5 mm2 |
| Width | 59.5 mm | |
| Height | 50 mm | |
| Depth | 76 mm | |
| Operating position | Any | |
| Operating temperature | ϑ | - 25 ÷ 40 °C |
| Article number of DIN rail bracket | 71 541 |