HIG-PS 24V/5W

Universal power supply for mounting on the 35 mm DIN rail, primarily intended for powering the remote monitoring panels MDS-D, MDS-DELTA or insulation fault location system HIG-IFL DELTA produced by HAKEL company.
Output voltage is stabilized at 24 V DC.
The operation of the power source is indicated by a green LED on the front panel of the product.
Integrated output short-circuit protection and thermal fuse with an automatic renewal of the power supply after fault clearance.
This power supply source is also designed for industrial use such as power supply for current loop of two-wire transmitters, sensors, indication devices etc.
The power supply HIG-PS 24V/8W is equipped with backup capacitors that allow short-term power outages to be bridged.

pcs

INQUIRE

Nominal supply voltage AC	U_s	100 ÷ 265 V
Frequency	f	47 ÷ 440 Hz
Nominal supply voltage DC	U_s	100 ÷ 265 V
Output voltage DC	U_out	24 V
Output current	I_out	220 mA
Power	P	5 W
Isolation voltage input / output AC		4 000 V
Degree of protection		IP20
Operating temperature	ϑ	- 25 ÷ 50 °C
Recommended cross-section of connecting wires	S	1 mm²
Power conductor stripping length		7
Tightening torque		0.5
Installation		On DIN rail 35 mm
Modular width		2
Width		36 mm
Height		90 mm
Depth		56.5 mm
Operating position		Any
Altitude		up to 2 000 m. a. s. l.
Protection class according to IEC 61140		II
Pollution degree according to IEC 60664-1		2
Operation type		Permanent
Recommended fuse protection		6 A/gG

Designed according to standards
Safety of power transformers, power supplies, reactors and similar	IEC 61558-1:2005