HT-NET PoE+ 6cat 802.3at

Designed for protection and faultless data transmission within computer networks category 6, normative conformity with category 6A / EA, ISO / IEC 11801.
Possibility to use PoE + according to IEEE 802.3at.
Protect input electronic circuits of network cards against damage caused by surge effects in the LPZ Concept at the boundaries of LPZ 1 – LPZ 3.
It is recommended to use at the input of protected equipment.
Connection via RJ45 connector.
High transmission speed 500 Mbit/s.

pcs

Inquire

Testing category according to IEC 61643-21:2000 and EN 61643-21:2001		C1, C2, C3
Connector type		RJ45
Rated operating DC voltage	U_N	0 ÷ 48 V
Maximum continuous operating voltage DC	U_C	58 V
Maximum continuous operating voltage AC	U_C	41 V
Rated load current	I_L	1 A
C1 Nominal discharge current (8/20) line/line	I_n	0.15 kA
C2 Nominal discharge current (8/20)	I_n	1 kA
C2 Voltage protection level at I_n (line/line)	U_p	< 150 V
C2 Voltage protection level at I_n (line/PE)	U_p	< 700 V
C3 Voltage protection level at 1 kV/μs	U_p	< 120 V
Data rate		500 Mbit/s
Bandwidth	B	0 ÷ 500 MHz
Lightning protection zone		LPZ 1-2, LPZ 2-3, LPZ3
Housing material		AlMgSi (EN AW 6060)
Degree of protection		IP20
Operating temperature	ϑ	- 40 ÷ 70 °C
Installation		On DIN rail 35 mm
Operating position		Any
Signalling at the device		None
Remote signalling		No
Normative conformity		Kat. 6A/EA, ISO/IEC 11801
PoE		IEEE 802.3at

Application standards
Protection against lightning	IEC 62305:2010
Designed according to standards
Requirements and test methods for SPDs connected to telecommunications and signalling networks	IEC 61643-21:2000