HT-NET PoE+ 6cat 802.3at G
Article number: 57 103- Designed for protection and faultless data transmission within computer networks category 6, normative conformity with category 6A / EA, ISO / IEC 11801.
- Possibility to use PoE + according to IEEE 802.3at.
- Protect input electronic circuits of network cards against damage caused by surge effects in the LPZ concept at the boundaries of LPZ 1 – LPZ 3.
- It is recommended to use at the input of protected equipment.
- Connection via RJ45 connector.
- High transmission speed 500 Mbit/s.
| Testing category according to IEC 61643-21:2000 and EN 61643-21:2001 | C1, C2, C3 | |
| Connector type | RJ45 | |
| Rated operating DC voltage | UN | 0 ÷ 48 V |
| Maximum continuous operating voltage DC | UC | 70 V |
| Maximum continuous operating voltage AC | UC | 41 V |
| Rated load current | IL | 1 A |
| C1 Nominal discharge current (8/20) line/line | In | 0.15 kA |
| C2 Nominal discharge current (8/20) | In | 1 kA |
| C2 Voltage protection level at In (line/line) | Up | < 700 V |
| C2 Voltage protection level at In (line/PE) | Up | < 700 V |
| Data rate | 500 Mbit/s | |
| Bandwidth | B | 0 ÷ 500 MHz |
| Lightning protection zone | LPZ 1-2, LPZ 2-3 | |
| Housing material | AlMgSi (EN AW 6060) | |
| Degree of protection | IP20 | |
| Operating temperature | ϑ | - 40 ÷ 70 °C |
| Installation | On DIN rail 35 mm | |
| Operating position | Any | |
| Signalling at the device | None | |
| Remote signalling | No | |
| Suitable for use with cabling category according to ISO/IEC 11801 | Cat.6A/EA | |
| PoE standards | IEEE 802.3at |