MED STD-line 6,3 kVA (400/230)

Article number: 71 135/23/400
  • Transformers with standard UI shape lamination, composite core and vertical mounting are intended for the supply of equipment in medical locations.
  • Produced with a voltage transfer of 230 / 230 V or 400 / 230 V, frequency 50 / 60 Hz, protection IP00, terminals IP20, insulation class F (155 °C) and maximum ambient temperature of 40 °C.
  • Transformers have reinforced insulation and protective shielding between the primary and secondary winding.
  • Equipped with two temperature sensors PT100, thanks to these sensors, the transformers work better with HAKEL ISOLGUARD insulation monitoring devices and provide the best possible basis for measuring the insulation status and transformer heating.
  • Transformers can be supplied in a steel case with IP23.
Primary supply voltage AC 400
Secondary voltage AC 230 V
Power P 6 300 W
Transformer construction Standard
Frequency f 50 ÷ 60 Hz
In-built temperature sensor 2 x PT100
In a steel cover Yes
Protection class according to IEC 61140 I
Insulation class F
Operating temperature ϑ - 25 ÷ 40 °C
Degree of protection IP23
Short-circuit resistance of the secondary Non resistant
Trigger current Max. 8 times the rated current
Clamp fastening range (solid conductor) 1.5 ÷ 25 mm2
Clamp fastening range (stranded conductor) 1.5 ÷ 16 mm2
Recommended cross-section of connected conductors S 10 mm2
Short-circuit voltage Uk 3 %
No-load losses ∆P0 60 W
Total losses ∆P 270 W
Efficiency η 95.9 %
Noise level < 35 dBA
Recommended back-up fuse 32 A/gG
QUICK CONTACT
Quick contact
Ing. Aneta Sčebelová
 +420 494 942 314