HIG-CD 3k6
Article number: 70 984- It is necessary to observe the use of the appropriate coupling unit for the specific insulation monitoring device.
- The coupling devices HIG-CD are used to adapt the input circuits of the insulation monitoring device to a higher operating voltage than the operating voltage of the IMD directly.
- The coupling devices are connected between the insulated system and the insulation monitoring device.
| Rated operating AC voltage | UN | 2 500 V |
| Rated operating DC voltage | UN | 3 600 V |
| Maximum continuous operating voltage AC | UC | 2 500 V |
| Maximum continuous operating voltage DC | UC | 3 600 V |
| Designed for insulation monitoring device | HIG99/3k6 | |
| Internal resistance | RIN | 2 x 900 |
| Offset for insulation monitoring device | Rtl ext | 900 kΩ |
| Use for traction | Yes | |
| Housing material | Aluminium, Electroinsulating potting compound | |
| Degree of protection | IP65, except for connecting wires | |
| Operating temperature | ϑ | - 40 ÷ 70 °C |
| Cable length | l | 2 m |
| Recommended cross-section of connected conductors | S | 2.5 mm2 |
| Tightening moment | 1,2 | |
| Installation | On the mounting plate | |
| Operating position | Any | |
| Operation type | Permanent | |
| Lifetime | > 100 000 h |