HIG-GW E01
Article number: 70 980- The HIG-GW series products are communication gateways that enable remote monitoring of the HAKEL insulation monitoring system.
- The products are connected to the External RS485 bus of the MDS-D remote monitoring panel and allow remote access to all devices connected to this unit.
- Visualization is available to users via an integrated web server (web pages). The product can therefore be accessed from any device and any operating system.
- There is also the option to transfer data to another system (typically to a central intelligent building management system) using the MODBUS TCP protocol.
| Nominal supply voltage DC | Us | 24 V |
| Supply voltage range | 9 ÷ 32 V | |
| Power consumption | P | 15 VA |
| Electrical strength against internal circuits | 1 500 V | |
| Power source | External power supply SELV 24 V DC | |
| Supported module of remote monitoring panels (MDS) | MDS-D | |
| Communication interface for user | Ethernet bus, Webserver | |
| Communication protocol | MODBUS TCP | |
| Connector type | Screw terminals, RJ45 | |
| Housing material | PC/ABS self-extinguishing | |
| Degree of protection | IP20 | |
| Recommended fuse protection | 4 A/gG | |
| Operating temperature | ϑ | - 5 ÷ 60 °C |
| Storage temperature | - 25 ÷ 70 °C | |
| Recommended cross-section of connecting wires | S | 0.75 mm2 |
| Power conductor stripping length | 6 | |
| Tightening torque | 0.2 | |
| Installation | On DIN rail 35 mm | |
| Width | 106.2 mm | |
| Height | 90 mm | |
| Depth | 32.2 mm |