HSAA-1P
Article number: 32 007- Surge arresters type T3 intended for use in installation and floor boxes and cable trays.
- Additional protection of socket circuits, which are treated with surge protection and high-frequency filters (HSAF, HSAF3).
- Can be used to protect LED lights.
- Installed at the boundaries of LPZ 2 – LPZ 3, as close as possible to the protected device (no further than 5 m).
- In front of HSAA-1P must be installed a lightning current and surge arrester T1 and T2 from HAKEL company.
| Test class according to EN 61643-11:2012 (IEC 61643-11:2011) | T3 | |
| Number of poles | 2 | |
| Rated operating AC voltage | UN | 230 V |
| Maximum continuous operating voltage AC | UC | 275 V |
| Open circuit voltage of the combination wave generator (L/N, L/PE) | UOC | 6 kV |
| Open circuit voltage of the combination wave generator (N/PE) | UOC | 10 kV |
| Voltage protection level at UOC (L/N) | Up | < 1 kV |
| Voltage protection level at UOC (L/PE, N/PE) | Up | < 1.3 kV |
| Nominal discharge current for class II test (8/20) L/N, L/PE | In | 3 kA |
| Nominal discharge current for class II test (8/20) N/PE | In | 5 kA |
| Temporary overvoltage test (TOV) for tT = 5 s (L/N) | UT | 337 V |
| Temporary overvoltage test (TOV) for tT = 120 min (L/N) | UT | 440 V |
| Temporary overvoltage test (TOV) for tT = 0.2 s (N/PE) | UT | 1 200 V |
| Response time (L/N) | tA | < 25 ns |
| Response time (L/PE, N/PE) | tA | < 100 ns |
| Maximal back-up fuse | 16 A gL/gG | |
| Residual current | IPE | ≤ 5 µA |
| Lightning protection zone | LPZ 2-3, LPZ3 | |
| Housing material | Polyamid PA6, UL94 V-0 | |
| Degree of protection | IP20 | |
| Operating temperature | ϑ | - 40 ÷ 70 °C |
| Humidity range | RH | 5 ÷ 95 % |
| SPD cable outlet type | Slaněný vodič CYA | |
| Recommended cross-section of connected conductors | S | 2.5 mm2 |
| Installation | For window sill gutter 45 x 45 mm, In the installation box | |
| Operating position | Any | |
| Product placement environment | Internal | |
| Signalling at the device | Acoustic | |
| Importance of local signaling |
OK – no piezo siren FAULT – piezo siren sound |
|
| Remote signalling | No | |
| Includes EMI / EMC filter | No | |
| Pluggable version | No | |
| Lifetime | > 100 000 h |